When something goes wrong with the wiring in your home, there is usually a moment that tips it from a problem you are putting off to one that cannot wait. An outlet in the kitchen that stopped working and has not come back. A panel that buzzes when you open it. Those are the calls we take, and Waxhaw homes and businesses are exactly who we take them from.
Waxhaw is a town with a mix of established neighborhoods and newer construction, and the electrical work reflects that. Older properties carry wiring that was never designed for the loads a modern household puts on it. Newer homes sometimes need circuits added before the original service runs out of room. Whatever the situation, call us and we will scope the job on the phone before anything is scheduled.
We cover Waxhaw and the surrounding area, available every day from 7:00 AM to 9:00 PM at (980) 491-9795.
The most common calls start with a symptom: a light that flickers when nothing obvious is pulling load, an outlet that feels warm to the touch, or a section of the house that has gone dark without explanation. We trace the problem to its source rather than replacing parts until something sticks. A dead outlet might be a tripped GFCI two rooms away, or it might be a loose connection in the wall that has been building heat for months. The diagnosis comes first.
A panel that was sized for a house in an earlier decade often cannot carry what that same house runs today. When breakers trip under normal load, when there is no room to add a circuit, or when a fuse box is still in place, a panel upgrade is usually the right answer. We handle full replacements, service-entrance upgrades, and the load calculations that confirm what the new panel needs to carry. For homes adding an EV charger or a standby generator, panel capacity is the first thing we check.
A detached garage or a workshop that needs real power runs into a practical limit quickly: running every circuit back to the main panel is not always feasible, and a single circuit is not enough for tools, lighting, and a charger running at the same time. A subpanel solves that by bringing a dedicated feed to the outbuilding and distributing it locally. We size the feed correctly for the load, run the wiring, and install the subpanel so the space has what it actually needs.
Outdoor receptacles take more abuse than indoor ones, and the wrong enclosure or a missing in-use cover creates a real hazard when rain or humidity is involved. We install weatherproof outlets and enclosures for patios, driveways, outbuildings, and exterior walls, using the right box ratings and conduit for the exposure. If an existing outdoor outlet has a cover that does not seal properly or a box that has corroded, we replace the whole assembly rather than patching around it.
A generator that is plugged in or wired without a transfer switch can back-feed the utility line, which is a hazard for anyone working on the grid outside your property. A properly installed transfer switch isolates your home's wiring from the utility when the generator is running, so the circuits you need are powered safely. We handle the transfer switch installation and the wiring that connects it to the generator, and we confirm the installation meets code before we leave. The storm season in this region makes this work practical rather than precautionary.
A panel where half the breakers are labeled "misc" or not labeled at all is a problem the moment you need to turn off a specific circuit. We identify every circuit, confirm the breaker matches the wire gauge it protects, and label the panel clearly. This is work that often comes up alongside a panel upgrade or a safety inspection, and it is worth doing as a standalone job in any older home where the original labels were never accurate to begin with.
Electrical work gets priced on what the job actually requires, and that is not something a flat number on a page can capture honestly. What the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change are the things that move a quote. A simple outlet replacement and a circuit that needs to be traced through finished walls are different jobs, and they are priced differently.
When you call, we ask the questions that help us understand the scope. For most repairs and installations, that conversation is enough to give you a clear rate before we schedule anything. For larger projects, the scope gets confirmed on-site before a final number is given. Either way, you know what you are agreeing to before any work begins. Straight answers about your panel and wiring are part of the call, not something you have to wait for until someone shows up.
No diagnostic fee, service-call rate, or project estimate is published here because those figures belong to the conversation where the job is actually scoped. A quick read of the electrical services page covers the rest.
Call (980) 491-9795 and get the number that applies to your situation.
Recessed lighting and LED fixtures come up constantly in homes that were built with a single ceiling fixture per room and nothing else. A well-placed set of recessed lights changes how a room reads, and LED trim makes the running cost lower than older incandescent setups by a significant margin. We run the circuits, set the boxes, and handle the wiring so the layout works as planned. Dimmer switches, under-cabinet lighting, and pendant fixtures over kitchen islands are all part of the same category of work, and they are worth bundling with other jobs when the ceiling or wall is already open.
A driveway that is dark past the porch light, a backyard with no lighting at all, or a side entry that relies on a single fixture that has not worked in months are all situations worth fixing. Motion-sensor lights, security lighting along exterior walls, and landscape wiring for path or accent fixtures all require weatherproof installation and the right circuit feed. We handle the wiring from the panel out to the fixture location, and we make sure the installation holds up to the conditions it will actually face. If you are already having outdoor outlet work done, adding a lighting circuit at the same time avoids opening the same wall or trench twice.
When you call, a real person answers. We scope the job on the phone, confirm what is available, and get it on the calendar. For straightforward repairs, that call is usually enough to confirm the rate and the appointment in one conversation.
For situations that will not keep, we take short-notice calls and can tell you what the current schedule allows when you reach us. A sparking outlet, a panel that is buzzing or warm, or a breaker that will not reset are situations worth calling about promptly rather than leaving until later. Describe what you are seeing and we will tell you how to handle it while we work out the timing.
For tenants and businesses that need to stay operational, we work around the schedule that makes sense for the property. That might mean confirming access with a tenant in advance, or planning the work for a time when it causes the least disruption to a business that cannot afford to go dark mid-day. We confirm the details on the call so nothing is left to sort out at the door.
Rental properties and managed buildings create a specific set of logistics that a homeowner calling about their own house does not have to deal with. The person booking the work is not always the person who has to be there for it, the invoice may need to go to a business account rather than a personal one, and a landlord often needs a record of what was done and what was found before the work is closed out.
We handle those details on the call. Access arrangements for a tenant, who receives the invoice, and what documentation is needed afterward are all questions worth raising when you book. We can note the access instructions, confirm who to call when we arrive, and make sure the paperwork reflects what the job covered. The wiring done properly, start to finish, is what a landlord needs on record when a tenant raises a concern later or when a property goes back on the market.
Electrical safety inspections are a practical step for rental properties, particularly in older homes where the wiring has not been reviewed in years. An inspection identifies what is working correctly, what needs attention, and what represents a more urgent concern, and it gives the landlord a clear picture of the property's electrical condition before a new tenancy begins.
We serve Waxhaw as a primary part of our coverage area and work throughout the surrounding communities as well. That includes Mineral Springs, Wesley Chapel, Weddington, Marvin, and JAARS, along with the broader Union County area. If you are between towns or just outside these names, call and we will confirm whether your address is in range. Most of the time it is.
Coverage questions are answered on the phone, not on a map.
Call (980) 491-9795 and ask.
Crawl space work involves accessing the wiring runs beneath the floor, which can be tight and sometimes requires clearing debris or insulation to reach the circuit. We assess the access on the call and in person before starting. The work itself, tracing circuits, replacing wire runs, or adding new ones, follows the same process as any other wiring job once we are in the space.
Permit requirements depend on the type and scope of the work, and they can vary between the town and the county depending on where the property sits. We confirm what applies to your specific job before anything is scheduled. You do not need to research the requirements yourself before calling.
A burning smell at an outlet or switch is a sign that something is generating heat in the wiring behind it, which is a fire risk and not something to leave until a convenient time.
Stop using the outlet immediately, turn off the breaker feeding it if you can reach the panel safely, and call us at (980) 491-9795 as soon as you can.
We will scope the problem on the call and get it looked at promptly.
We leave the work area in the same condition we found it. Wire offcuts, packaging, and any debris from the work itself are removed or bagged before we leave. If the job involves cutting into walls or ceilings, we contain the dust and debris as much as the access allows.
Yes. We assess what is in place, determine whether it can be completed safely and to code, and handle the work from that point forward. We do not make assumptions about what the previous work covered. We check it, explain what we find, and confirm the scope before proceeding.
Most residential work does not come with drawings, and we approach it the same way regardless. We trace the circuits from the panel, test each one, and build a picture of what is there before any work starts. For older properties where the wiring has never been documented, this is standard practice and not a complication that changes the scope.
Homes built before the 1990s often have panels that were never sized for modern loads, branch-circuit wiring that has not been updated, and GFCI protection missing from kitchens, bathrooms, and outdoor circuits where it is now required. These are not always urgent problems, but they are worth identifying through an inspection so you know what the property's electrical system actually looks like before something fails.
A dryer requires a dedicated 240-volt circuit, typically a 30-amp circuit with the correct outlet configuration for the dryer plug. It cannot share a circuit with other appliances and the wire gauge has to match the breaker rating. If the laundry area does not have a dryer outlet already, we run the circuit from the panel and install the correct outlet for the connection.
Electrical issues do not tend to improve on their own. A breaker that trips once and resets might trip again under the same load tomorrow, or it might not reset at all. The call is the fastest way to find out what the job involves and how soon we can be out. Quick response. Code-correct work. Tidy finish.
Call (980) 491-9795 every day from 7:00 AM to 9:00 PM.
We will scope the job, confirm the price, and tell you what is available on the schedule. We cover Waxhaw and the surrounding area, and the call is where it starts.
Also serving the towns around: Mineral Springs, Wesley Chapel, Weddington, Lancaster.
For every town we reach, see our town-by-town list.
From a tripped breaker to a full panel upgrade, we handle the complete range of electrical repair and installation work for homes and businesses in Waxhaw and across Union County. The table below covers what each service includes, who it fits, and what is worth knowing before you call. If a job on this list matches what you are dealing with, call for a quote and we will walk through the specifics before anything is scheduled.
| Electrical Service | What It Covers | Ideal For | Good to Know |
|---|---|---|---|
| Ceiling Fan Installation | Fan and fixture replacement, New ceiling box installation, Circuit run where none exists, Wiring confirmation | Any room where a ceiling fan is being added or replaced, with or without existing wiring | If there is no existing wiring in the ceiling, we run a new circuit rather than leaving the fan on an extension or adapter. |
| Whole-Home Surge Protection | Panel-level surge device, Service-entrance installation, Protection for all circuits, Standalone or add-on job | Homes with smart appliances, electronics, or medical equipment vulnerable to voltage spikes from nearby lightning | A panel-level surge device catches a major voltage event before it reaches any circuit in the house. Power strips with surge ratings do not provide the same coverage. |
| Electrical Panel & Service UpgradesMost Popular | Full panel replacement, Service-entrance capacity increase, Load calculation, Subpanel installation | Homes adding EV chargers, large appliances, or home offices that exceed the original service capacity | Panel upgrades typically require a utility coordination step for the meter connection. We handle that process as part of the job. |
Call (980) 491-9795 to get a quote and talk through what the job actually involves before anything is scheduled.
(980) 491-9795